Denton Drywall Installation: Drywall Installation & Repair for Residential & Commercial in Denton Texas
#1 Drywall Contractor in Denton, TX
Denton Drywall specializes exclusively in drywall installation and finishing and brings over 20 years of experience and proven processes to every project in Denton, TX. From new construction hang jobs to patch repairs, texture matching, and Level 5 smooth-wall finishes, we handle the full scope of drywall work.
We back every project with fixed-price quotes, dust-controlled installation using HEPA filtration systems, and a written workmanship warranty. Whether you're a homeowner in the middle of a remodel or a builder managing new residential construction, this article gives you the information needed to make a confident, informed decision about your drywall project.
Why we're the best drywall installation and repair company in Denton, TX:
- 20+ Years of Drywall Experience – Trusted expertise in drywall installation, repair, patching, finishing, and texture application for residential and commercial properties.
- Seamless Texture Matching – We carefully match existing wall and ceiling textures so repairs blend naturally and are virtually invisible.
- Clean, On-Time, Professional Service – Our crews arrive on schedule, protect your property, and leave the work area clean when the job is complete.
- Residential & Commercial Drywall Specialists – From small drywall repairs to full-property installations, we have the experience to handle projects of any size.
- Honest Pricing & Quality Craftsmanship – Clear estimates, premium materials, and attention to detail ensure durable results that stand the test of time.
Denton Drywall provides drywall installation, drywall repair, and drywall finishing services for homeowner and business surrounding Denton, TX cities including Corinth, Lake Dallas, Hickory Creek, Shady Shores, Highland Village, Argyle, Krum, Sanger, Aubrey, Pilot Point, Cross Roads, Little Elm & more.
Get a FREE Quote
Our Residential Drywall Services
Drywall Installation
Professional drywall installation creates smooth, durable walls and ceilings for new construction, remodels, additions, and basement finishing projects. Drywall remains the most common interior wall material in America, with a typical new home containing thousands of square feet of drywall throughout the structure.
Drywall Repair
Drywall repair addresses holes, cracks, dents, water damage, and everyday wear that can make walls look aged or neglected. Most drywall repairs can be completed in a single visit, restoring the appearance and structural integrity of the wall without requiring full replacement.
Water Damage Drywall Repair
Water-damaged drywall can weaken quickly and may develop mold growth if not addressed promptly. Damaged sections are removed, dried, replaced, and refinished to restore both appearance and safety.
Ceiling Repair
Ceiling repairs address cracks, water stains, sagging sections, nail pops, and damaged drywall. Prompt repairs help prevent moisture-related issues and preserve the appearance of interior spaces.
Popcorn Ceiling Removal
Popcorn ceiling removal modernizes interior spaces and creates a cleaner, more contemporary appearance. Many homeowners choose removal to improve aesthetics, increase home appeal, and simplify future maintenance.
Drywall Texture Matching & Repair
Damaged drywall doesn't have to leave a visible patch behind. We expertly match orange peel, knockdown, popcorn, and custom textures to help repairs blend naturally with surrounding walls and ceilings, creating a seamless finished appearance
Our Commercial Roofing Services
Commercial Drywall Installation
Commercial drywall installation provides complete wall and ceiling systems for offices, retail stores, medical facilities, restaurants, warehouses, and other commercial properties. Commercial projects often involve tens of thousands of square feet of drywall and require coordination with architects, general contractors, and multiple trades to meet project schedules and building code requirements.
Tenant Improvement Drywall
Tenant improvement drywall services support office buildouts, retail renovations, restaurant remodels, and leased commercial space reconfigurations. Because commercial leases frequently change occupants every 3 to 10 years, tenant improvement projects represent one of the most common types of commercial interior construction work.
Metal Stud Framing & Drywall
Metal stud framing and drywall installation create the structural framework for interior commercial walls, offices, conference rooms, and tenant spaces. Steel framing is widely used in commercial construction because it is non-combustible, dimensionally stable, and resistant to warping, shrinking, and termite damage.
Commercial Drywall Repair
Commercial drywall repair addresses wall and ceiling damage caused by tenant turnover, building maintenance, water intrusion, remodeling projects, and daily business operations. Prompt repairs help businesses maintain a professional appearance while minimizing disruptions to employees, customers, and tenants.
Fire-Rated Drywall Installation
Fire-rated drywall systems are specifically designed to slow the spread of fire and heat between building areas, providing additional time for occupant evacuation and emergency response. Many commercial buildings require one-hour, two-hour, or higher-rated wall assemblies to comply with local building codes and life-safety regulations.
Acoustic & Soundproof Drywall Systems
Acoustic drywall systems help reduce sound transmission between offices, conference rooms, medical facilities, classrooms, hotels, and multifamily buildings. Properly designed sound-control assemblies can significantly improve speech privacy, occupant comfort, and workplace productivity in noise-sensitive environments.
Why are we the Best Drywall C
in Denton, TX?
Our Drywall Process
Step 1: Free On-Site Drywall Estimate and Project Assessment
We start with a free, on-site assessment of your space. Our team measures square footage, inspects existing walls and framing, and identifies issues like water damage, nail pops, seam separation, or sagging.
From there we recommend the right approach, whether that's a full drywall installation, targeted drywall repair, or a sheetrock replacement. You'll get a clear written estimate up front, with no surprises once work begins.
Step 2: Material Selection and Drywall Delivery
Next we help you choose the right board for the job. That means standard gypsum wallboard for living areas, moisture-resistant drywall for bathrooms and basements, fire-rated drywall for garages, and soundproof drywall for shared or interior walls.
After more than two decades supplying Denton's new construction and remodeling projects, we know which materials hold up in North Texas homes. We deliver and stage everything on schedule so your project keeps moving.
Step 3: Drywall Hanging and Installation
Our crew measures, cuts, and secures each panel to the wall and ceiling framing with properly spaced drywall screws. Careful panel layout reduces seam visibility, minimizes future cracking, and creates a stronger finished surface.
Ceiling drywall installation gets extra attention because of the weight and positioning overhead. Proper fastening here is what prevents sagging and seam separation down the road.
Step 4: Drywall Taping, Mudding, and Finishing
This is where 20 years of experience shows. We tape every seam with paper or fiberglass mesh tape, embed it in a clean bedding coat of joint compound, then build filling and finish coats over all flats, butts, and angles.
Corner bead goes on every outside corner to keep edges crisp and impact-resistant. We finish to the level your space requires, from a standard Level 4 for painted rooms to a Level 5 skim coat for areas with critical lighting.
Step 4: Drywall Sanding, Texturing, and Paint-Ready Prep
Once the joint compound is dry, we sand each surface smooth, removing ridges and imperfections that show up after painting. We then match or apply your chosen texture, including orange peel, knockdown, skip trowel, or a smooth Level 5 finish.
The result is a seamless, paint-ready surface across every adjoining panel. If you're modernizing, this is also when we handle popcorn ceiling removal and texture removal.
Step 4: Final Walkthrough, Cleanup, and Workmanship Warranty
We finish with a final inspection alongside you to confirm every wall and ceiling meets our standards. Our team cleans the work area, controls dust, and hauls away drywall debris and demolition waste.
Before we leave, we walk you through the completed work and back it with our workmanship warranty. After 20-plus years serving Denton homeowners, builders, and commercial clients, our reputation depends on getting it right.
How Much Does Drywall Installation Cost in Denton, TX?
The cost to install drywall in Denton typically runs from $1.50 to $3.50 per square foot for basic installation, and $2.00 to $4.50 per square foot for install and finish drywall, depending on finish level, ceiling height, and project complexity. For a standard 2,000-square-foot home interior, total drywall cost can range from $4,000 to $8,000 or more.
Pricing comes down to a few key factors. Labor typically represents 50% to 70% of your total drywall cost, with the rest going to materials. The finish level matters too: Level 4 (standard smooth wall) is typical for homes, while Level 5 (ultra-smooth finish) costs more due to additional skim coating. Texas keeps prices reasonable overall, since construction costs in Texas run about 8% lower than the national average
Specialty board adds to material costs. Moisture-resistant green board runs 25 to 30% more than standard drywall, mold-resistant purple board runs 35 to 45% more, and Type X fire-rated 5/8-inch drywall, required on garage ceilings and shared walls, typically costs $13 to $17 per sheet.
Request a free quote for an accurate estimate on your drywall installation project.
Drywall Type | Typical Cost Range (per sq ft) |
|---|---|
Drywall Hanging Only (no finish) | $1.00-$2.00 |
Drywall Taping and Mudding | $0.50 – $1.00 |
Drywall Sanding and Texturing | $0.50 – $1.50 |
Complete Drywall Installation (hang, tape, finish) | $1.50 - $3.50 |
Drywall Install and Finish (Level 4-5) | $2.00 – $4.0 |
Garage Drywall Installation (fire-rated, two-car) | $1,500 - $4,000 (total) |
Hear it from our happy clients!
"We had water damage in our ceiling after a roof leak, and they handled the whole drywall repair start to finish. They cut out the damaged section, replaced it, matched the texture perfectly, and you honestly can't tell where the repair was. Fast, clean, and professional. Best drywall contractor we've worked with in Denton."
Marcus H.
Homeowner, Denton TX
"We hired them for the drywall installation on our new build out in the Cole Ranch area. Their crew hung and finished the entire house on schedule, and the Level 5 finish in our living room looks flawless under all the natural light. Twenty-plus years of experience clearly shows in the quality of their finishing work."
Priya N.
Homeowner, Denton County
"As a general contractor, I need drywall subs who show up, hit deadlines, and get the details right. These guys handled the commercial drywall for our office buildout, including the fire-rated assemblies, and passed inspection with no issues. Reliable crew, fair pricing, and they keep the site clean. We'll keep using them."
Devin A.
General Contractor, North Texas
Residential and Commercial Drywall FAQs
Drywall installation in Denton typically runs $1.50 to $3.50 per square foot for a complete job and $2.00 to $4.50 per square foot for install and finish work, depending on finish level and ceiling height.
For a standard 2,000-square-foot home interior, expect a total in the $4,000 to $8,000 range. Specialty board like fire-rated, moisture-resistant, or soundproof drywall costs more.
We give every Denton homeowner and business a free, written estimate before any work starts.
For a standard residential project, hanging drywall in a 1,000 to 2,000 square foot space usually takes one to two days. Taping, mudding, sanding, and finishing add several more days because joint compound needs time to dry between coats.
A full 2,000-square-foot home generally takes seven to 10 days total from hanging to paint-ready walls. Commercial drywall projects with larger square footage run longer, and North Texas humidity can affect compound drying time.
We provide drywall installation for new home construction, room additions, and full interior remodels throughout Denton, TX. Each project type has different requirements. New construction typically involves hanging large volumes of drywall across every room, while remodels may require careful integration with existing walls.
For additions, we coordinate with framing contractors to ensure walls are properly prepared before drywall goes up. We serve both residential homeowners and professional builders who need dependable, consistent results on tight schedules.
Our core services include drywall hanging, taping, mudding, sanding, texture application, and paint-ready finishing. We do not perform drywall work occasionally as a side task — it is our primary specialty, which leads to more consistent results across every project type.
Every project begins with a detailed, fixed-price written estimate that outlines the full scope of work and pricing before anything starts. This removes uncertainty and gives homeowners and contractors a clear picture of the investment involved.
Cost is influenced by several factors including total square footage, ceiling height, number of corners and cutouts, and the finish level selected. A Level 3 finish is standard for walls receiving heavy texture, while a Level 5 finish — our specialty — is the highest quality option and is particularly important in rooms with significant natural lighting or smooth-wall paint applications.
Timeline depends on project size and scope. A single-room remodel may take 2–4 days, while a full new construction home can take 1–3 weeks depending on square footage and finish requirements. We provide realistic schedules and maintain clear communication throughout so there are no surprises.
It depends on the type and extent of the damage. Small holes, shallow dents, and hairline cracks are usually simple repairs, while extensive water damage, large holes, mold growth, or compromised structural integrity warrant replacing sections of drywall.
A good rule of thumb: if the drywall is sagging, feels soft or mushy, or shows visible mold, it's likely beyond repair and needs replacement. We inspect the area first and recommend the most cost-effective fix.
Selecting the right drywall type depends on where it will be installed. Standard 1/2-inch drywall works well for most interior walls and ceilings, but specific areas require specialized boards.
Moisture-resistant drywall (greenboard) is appropriate for bathrooms, kitchens, and laundry rooms; for wet areas behind tile, cement board is used instead. In garages and areas adjacent to mechanical rooms, Type X fire-rated drywall provides additional protection and is often required by local building codes.
- Bathrooms/kitchens: Moisture-resistant or cement board
- Garages/mechanical areas: 5/8-inch Type X fire-rated drywall
- Living areas: Standard 1/2-inch drywall
- Ceilings: 5/8-inch for added sag resistance
We use premium materials throughout every project, selecting the appropriate board type based on location, local code requirements, and long-term performance.
Uneven or out-of-plumb studs are one of the most common issues we encounter. We address these during the framing inspection phase by shimming, furring, or flagging corrections before hanging begins. This extra step is what separates a flat, professional wall from one that shows waves and irregularities after painting.
For ceilings, we use 5/8-inch drywall to resist sag and account for any variation in joist spacing. High or vaulted ceilings require additional planning for lift equipment and fastener patterns.
When soundproofing is a priority — such as in home offices, media rooms, or multi-unit spaces — we can recommend and install resilient channel systems, sound-dampening drywall products, or double-layer assemblies that reduce sound transmission. We also coordinate with insulation contractors to ensure insulation is in place before drywall is hung, avoiding costly reopening of walls later.
Before any drywall is hung, we inspect the framing for plumb, level, and spacing issues. Addressing structural inconsistencies at this stage prevents problems with flat walls and straight corners after finishing.
The installation process follows a defined sequence:
- Hanging – Drywall sheets are measured, cut, and fastened to studs and ceiling joists
- Taping – Seams and joints are covered with joint tape and an initial coat of compound
- Mudding – Multiple coats of joint compound are applied and feathered out
- Sanding – Surfaces are sanded smooth between coats to eliminate ridges and high spots
- Texture application – Orange peel, knockdown, hand-trowel, or smooth finishes are applied as needed
We use dust-containment systems, HEPA filtration, and protective barriers throughout the sanding process to minimize dust spread in your home. Before project completion, every surface is inspected to confirm it is paint-ready, free from visible seams, tape lines, or screw pops.
A qualified drywall contractor in Denton, TX should carry current licensing and full liability insurance. This protects the homeowner or builder if damage occurs on-site during the project. Always request proof of both before work begins.
We back our work with a written workmanship warranty, meaning any issues related to our installation or finishing will be addressed promptly. A verbal guarantee is not sufficient — written documentation is what provides real accountability.
Cleanup standards matter more than many homeowners expect. Drywall sanding generates fine dust that can spread through an entire home if not properly contained. We use dust-containment systems and HEPA filtration, and we perform daily cleanup to keep the workspace livable during the project.
Other factors worth evaluating include:
- Written, fixed-price estimates before work begins
- Texture matching capability for repairs or additions that need to blend with existing walls
- Communication practices — we provide daily project updates so homeowners and contractors always know where the project stands
- Photo documentation for transparency before, during, and after the project